I was fortunate enough to come across a flea market in the Flatiron District this past weekend where I found a beautiful, working Brownie Bull’s-Eye Camera. The camera dates back to the 1950s and has the following characteristics:
- Bakelite housing. Thick, durable plastic body. Front plate and some internal parts made of metal.
- 2 ¼ x 3 ¼ in. images. 8 images on 620 roll film. Standard 120 roll film can be used with modification to the film spool or by re-spooling to 620 spools.
- Shutter speed is approximately 1/50 sec. on the “Instant” setting. Bulb is available on the “Long” setting.
- Aperture is approximately f/11.
- Focusing is set by estimating the distance to the subject. The lens can be set from 4 ft to INF (infinity). Alternatively, the photographer who finds distance estimation challenging, can use the “Close-ups,” “Groups,” or “Scenes” labels and simply turn the lens focusing ring distance indicator to one of those settings (see Figure 1). The viewfinder does not reflect the lens focus.
- There is a safety feature that prevents multiple-exposures. The winding knob must be turned to the next frame after the shutter is released. A red “lightning bolt” also appears in the viewfinder, reminding the photographer to advance the film.
- Connectors on one side allow for the attachment of a Kodalite Flasholder (see Figure 2).
The camera’s frame counter (frame number indicator) window’s red cover on my camera was missing so I had to improvise. I cut a small square of Rosco red gel and taped it to the hole where the red filter would have been. This helps keep too much visible light from leaking into the camera and recording on the film.
Cleaning the Lens
I noticed that the camera’s lens and viewfinder were spotted with what was probably mold that had developed over several decades. It wasn’t that bad, but I wanted to get the lens elements as clean as possible. That was easy enough. I simply removed the four small screws on the front faceplate and pulled the faceplate off. On the back side of the plate, a simple twist of the retainer ring is all that it took to detach the rear lens element from the front (see Figure 3 for sequence). I used a cotton swab (and the tail of my t-shirt) to wipe off any debris. After that, I put it all back together.
Loading the Film
The camera was designed to use 620 roll film, which is no longer manufactured. It turns out that 120 roll film (still in wide use) can be used if it is re-spooled onto 620 type film spools. If you choose not to do this yourself, you can purchase re-spooled film. Alternatively, you can simply trim the plastic 120 spools down and load the film as is (see Figure 4). My camera came with a metal 620 type spool that I didn’t want to part with, so I made sure to tell the processing lab to return it with my negatives. You’ll at least need a good 620 spool to serve as the take-up spool. Without it, the nub on the end of the turning knob (inside the camera) might not have enough traction to turn the spool, since the holes on the 120 spools are wider. This is not an issue with the nub in the other chamber because it simply needs to seat the spool, not turn it.
Actually loading the film is easy. Place the fresh roll of film in the bottom chamber, pull the film paper leader up to the top take-up spool, insert the leader into the take-up spool notch, and wind a few turns. After you replace the back cover and turn the cover lock, just keep winding the knob until a number “1″ appears in the little red window. This takes quite a few turns and sometimes the number “1″ looks more like a thin line than a number.
You’ll get only 7-8 images off that 120 roll (the negatives are large). When you get to the end, keep advancing the roll until it’s all on the take-up spool. Take it out carefully and secure it with the included adhesive strip or some tape.
Later this week, I’ll present some example shots and discuss the camera’s performance in terms of quality and exposure.Get tips, inspiration, and discounts in your inbox! Signup for our free newsletter here!